8
Construction
C1 : 220µF
6. Electrolytic Capacitor.
Watch the polarity !
C...
Remark: even if the DC adapter
jack is not used, it must be
mounted, due to the internal
switch.
SK1 : DJ-005
7. DC Jack
-
SK... +
SW
T1 : BD135
Mount the transistor together with
the heatsink on the PCB, bend
the leads as necessary. Take
care that the metal back of the
transistor touches the heatsink.
Check that the leads of the tran-
sistor do not touch the heatsink.
8. Transistor
TRANSISTOR
METAL SIDE UP
10mm M3 BOLT
PCB
M3 WASHER
HEATSINK
M3 LOCK WASHER
M3 NUT
The PCB can easily be mounted
into our housing type G403.
Due to heat dissipation, it is ad-
visable to make some 4mm venti-
lation holes into the housing.
Holes for the adapter jack and
wires will also be necessary.
9. Mounting in an housing
