IVSPROM1
09.11.2010
©
Velleman nv
11
•
AUDIO (SLOW + ZOOM)
Press “SLOW” + “ZOOM” to select live or playback audio from audio channel 1~4.
Live audio from audio channel 1~4
(indicated in white).
Playback audio from audio channel 1~4
(indicated in yellow).
Audio channel unselected
•
P.T.Z. (
+ SEQ)
Press “
” + “SEQ” at the same time to enter or exit the PTZ control mode.
•
USB port
There are two USB ports on the front panel, one for connecting a USB mouse for mouse control, and the
other one for connecting an USB flash drive for video backup.
Note:
Do not
connect two USB mice or two USB flash drives simultaneously.
Note:
For compatible USB flash drive list, please refer to “APPENDIX 3” in the full user manual.
7.2 Rear Panel
•
VIDEO IN (1 ~ 4): Connect to the video connector of a camera.
Note:
The DVR will automatically detect the video system of the camera; make sure that the cameras are
properly connected to the DVR and powered before the DVR is turned on.
•
AUDIO IN (1~4)
Connect to the audio connector of a camera if the camera supports audio recording.
Note:
To make a video backup with audio, make sure the camera which supports the audio function is
connected to the video-in channel and audio-in channel. For example, the audio data from audio CH1 will
be recorded with the video data from video CH1.
•
AUDIO OUT
Mono audio output to connect to a speaker.
•
MONITOR
Connect to a CRT monitor for video output.
Note:
When both MONITOR and VGA are connected, press the left key
◄
on the DVR front panel during
DVR power-on to force the video output via MONITOR. For details, refer to
§5.5
.
•
CALL
Connect to a monitor specific for sequence display.
•
VGA
Connect to a LCD monitor directly.
Note:
When both MONITOR and VGA are connected, press the right key
►
on the DVR front panel during
DVR power-on to force the video output via VGA. For details, refer to
§5.5
.
•
IR
Connect an IR receiver extension line (not incl.) for remote control.
•
EXTERNAL I/O
This port is used to connect external devices (such as speed dome cameras or external alarm, etc).
•
LAN
Connect to Internet by LAN cable.
•
DC 19V
Connect to the supplied adapter.
•
Power Switch
Switch to “|” to turn on the power, to “
|
” to turn off the power.
8.
Basic operation
Note:
some of the features and functions described below only apply to the human detection camera.
8.1 Live page
Refer to the image below.
1
system time
4
recording icon
2
status bar
5
channel
3
available disk capacity
6
motion icon