VDPDMXC146 VELLEMAN
11
When the time is less than one minute, the indication only has one dot e.g.11.5 seconds is
displayed as 11.5
5. Transmit and Receive MIDI files
Open-loop mode
Closed-loop mode
6. Low Power
When the power voltage is low, the display will show LOP. Please check your power supply.
LOP may appear briefly just after you have turned the device on. Pay no attention to this, it’s
normal.
7. MIDI Run
•
If no MIDI data are received for ten minutes, the VDPDMXC146 goes to standby mode.
•
You need to enter the device ID (= 55H) in order to send or receive a file. You can add
scenes to the memory or call them up and you can exchange information with a device that is
connected to your VDPDMXC146.
•
This unit sends or receives NOTE information as follows :
NOTE NUMBER
VELOCITY
FUNCTION
22 – 69
Programme Master
Turn on/off programme 1 - 48
70 – 93
Turn on/off channel 1 – 24
94 FULL-ON
95 DARK
96 HOLD
97
Turn on/off audio chase
98 CHASE
/
SCENES
mode
99 DOUBLE
PRESET
mode
100 SINGLE
PRESET
mode
101 Step
change
102
Channel Dimmer
BLACK OUT
TRANSMITTER
MIDI out
RECEIVER
MIDI in
TRANSMITTER
MIDI out
MIDI in
RECEIVER
MIDI out
MIDI in
