LPTCX401 GB
4
The master fader controls all outputs at the same time.
The chaser speed can be adjusted as follows :
Select speed 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E or F with the
▲
and
▼
keys. The selected
speed is displayed for ± 3 seconds. Consequently, the display will show the number of the
programme currently selected.
The direction of the chase can be inverted by pressing the key of the programme currently
installed. Hold the AUTO key to change the direction automatically.
The fade adjustments allow you to adjust the luminous intensity of each individual channel :
from OFF to 100% ON. You can also use the master fader to this end, but the master fader only
allows you to adjust the luminous intensity of all channels at once.
SOUND-CONTROLLED MODE
Speed 0 and programme 0 are always selected upon activation of the device. Switch to audio
mode with the SP/AU key (audio LED indicator lights). The chaser speed is now controlled by
the built-in microphone or by the external audio input AUDIO IN (20 in figure page 3).
7. Cleaning and Maintenance
The following points have to be considered during the inspection :
1. All screws for installing the devices or parts of the device have to be screwed down tight and
must not be corroded.
2. The housing, mounting supports and connections should not be modified or tampered with
e.g. do not drill extra holes in mounting supports, do not change the location of the
connections, etc.
3. The electric power supply cables must be undamaged. Have the device installed by a
qualified technician.
4. Disconnect the device from the mains prior to maintenance activities.
5. Wipe the device regularly with a moist cloth. Do not use alcohol or solvents.
6. Entrust a qualified technician with the maintenance of this device. Contact your dealer for
spare parts if necessary.
