3
Assembly hints
1.3 Soldering Hints :
1-
Mount the component against the PCB surface
and carefully solder the leads
2-
Make sure the solder
joints are cone-shaped
and shiny
3-
Trim excess leads as close as possible to the sol-
der joint
REMOVE THEM FROM THE TAPE ONE AT A
TIME
!
Velleman hereby certifies that the device K8022 meets
the essential requirements and all other relevant stipulations of directive 1999/5/
EG and 1995/5/EC.
For the complete conformity declaration check out :
http://www.velleman.be/downloads/doC/CE_K8022.pdf
AXIAL COMPONENTS ARE TAPED IN
THE CORRECT MOUNTING SEQUENCE !
