ECAMIP601/ECAMIP601B
·
Quick Start Guide
Note:
You can enable the
Guarding Vision
service for the device during
activation. Refer to Chapter 5.1 for detailed information.
4.
Click
Activate
to start activation.
You can check whether the activation is completed on the popup
window. If activation failed, make sure that the password meets
the requirement and try again.
3.3
Modify the IP Address
Purpose:
To view and configure the camera via LAN (Local Area Network), you
need to connect the network camera in the same subnet with your
PC.
Use the SADP software or client software to search and change the
IP address of the device. We take modifying the IP Address via SADP
software as an example to introduce the IP address modification.
For IP address modification via client software, refer to the user
manual of client software.
Steps:
1.
Run the SADP software.
2.
Select an active device.
3.
Change the device IP address to the same subnet with your
computer by either modifying the IP address manually or checking
the checkbox of
Enable DHCP
.