IMAGE MODE
IMAGE
MODE
is used to adjust the image saturation,
and you can set it as
STD
(Standard) or
HIGH
-
SAT
(High
Saturation).
BRIGHTNESS
Brightness refers to the brightness of the image. You
can set the brightness value from 1 to 9 to darken or
brighten the image. The greater the value is, the
brighter the image is.
CONTRAST
This feature enhances the difference in color and light
between parts of an image. You can set the
CONTRAST
value from 1 to 9.
SHARPNESS
Sharpness determines the amount of detail an imaging
system can reproduce. You can set the
SHARPNESS
value from 1 to 9.
SATURATION
Adjust this feature to change the saturation of the color.
The value ranges from 1 to 9.
3DNR
The
3DNR
function can decrease the noise effect and
deliver more accurate and sharp image. You can set the
3DNR
value from 1 to 9.
AGC (Auto Gain Control)
It optimizes the clarity of the image in poor light
conditions. The
AGC
level can be set as
HIGH
,
MEDIUM
,
or
LOW
.
Note:
The noise will be amplified when setting the
AGC
level.
The higher the level is, the more obvious the noise is.
SLOW SHUTTER
SLOW
SHUTTER
increases the exposure time on a single
frame, which makes the camera more sensitive to the
light so that it can produce images even in low lux
conditions.
You can set the
SLOW SHUTTER
function as OFF, x2, x4,
x6, x8, x10, x12, x14, or x16 according to the different
light conditions.
MIRROR
OFF
,
H
,
V
, and
HV
are selectable for mirror.
OFF
: The mirror function is disabled.
H
: The image flips 180° horizontally.
V
: The image flips 180° vertically.
HV
: The image flips 180° both horizontally and
vertically.
2.5
FACTORY DEFAULT
Reset all the settings to the factory default.
2.6
EXIT
Move the cursor to
EXIT
and click Iris+ to exit the menu.
2.7
SAVE & EXIT
Move the cursor to
SAVE & EXIT
and click Iris+ to save
the settings, and exit the menu.
ECAMTVI101(B)/ECAMTVI201(B)
Summary of Contents for Etiampro CAMTVI201
Page 11: ......
