
DVR4MQA
- 9 -
VELLEMAN
b) System Menu
Press the MENU button and press
▲
or
▼
until 'SYSTEM' is selected (cf. figure on the right).
Press ENTER to enter the system set-up menu.
A screen as shown on the right will be displayed.
All instructions below start from this point.
1) AUDIO INPUT
To choose the channel to be recorded
(the audio of only 1 channel can be recorded).
2) BUZZER
If the buzzer is ‘ON’,
it will buzz when there is a motion detection.
3) EXT. ALARM
If it is ON, the external alarm output will be triggered when there is a motion detection.
4) VLOSS ALARM
If it is ‘ON’ and there is video loss, it can trigger the buzzer, send out an external alarm and start recording.
5) MOTION ALARM
If it is ‘ON’ and there is a motion detection, it can trigger the buzzer, send out an external alarm and start recording.
6) KEY MUTE
If it is set to ‘YES’, there will be no sound when you press a key.
7) HDD OVERWRITE Set-Up
If it is set to ‘YES’ and the HDD is full, previously recorded files will be overwritten without further warning notice.
8) MESSAGE LATCH Set-Up
If it is set to ‘NO’ (default setting), DVR messages will disappear after 10 seconds.
If it is set to ‘YES’, the DVR messages will remain on screen.
NOTE: video loss, alarm and motion messages will disappear after the set Alarm Duration time.
9) DATE DISPLAY Set-Up
Set the date appearance as Y/M/D, M/D/Y, D/M/Y or off.
10) DATE Set-Up
Set the date.
11) TIME Set-Up
Set the time.
12) CLEAR HDD Set-Up
Set this line to ‘YES’ and press ENTER. A screen as displayed on the right will appear.
Press
►
to clear the HDD or
◄
to cancel.
13) SYSTEM RESET Set-Up
To set all system settings back to factory default settings. Select ‘YES’ and press ENTER.
(System)
AUDIO INPUT
1
BUZZER
ON
EXT ALARM
ON
VLOSS ALARM
ON
MOTION ALARM
ON
KEY MUTE
YES
HDD OVERWIRTE
YES
MESSAGE LATCH
YES
DATE DISPLAY
D/M/Y
DATE
2003-MAY-21 (WED)
TIME
22:38:29
CLEAR HDD
YES
SYSTEM RESET
YES
All Data in HDD
Will Be Cleared
Are you sure?
(
◄
: No
►
: Yes)
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT