DVR16H3
V. 01 – 25/09/2014
10
©Velleman nv
12.
Push Video Configuration
12.1
Pin Connection
This DVR can send notifications to your mobile devices, such as iPhone
®
, iPad
®
and Android
®
mobile devices, if an alarm
event occurs (push video). However, only certain alarm-in pins support this function.
There are several methods to connect alarm sensors for push video:
via the push video alarm-in terminal
via the external I/O port.
Push Video Alarm-In Terminal
A push video alarm-in terminal is provided on the DVR rear panel. Refer to the table below for the pin connections that
support push video and their corresponding video channels.
Alarm
Corresponding video channel
Alarm 1
CH1
Alarm 2
CH2
Alarm 3
CH3
Alarm 4
CH4
External I/O port
Refer to the table below for the pin connections that support push video and their corresponding video channels.
Pin
Corresponding video channel
Pin 2
CH1
Pin 15
CH2
Pin 3
CH3
Pin 16
CH4
Alarm sensor connection
Connect the alarm sensor, such as magnetic contacts, to the push video alarm-in terminal or I/O pins that support push video
on the DVR rear panel.
12.2
Configuration
Before configuring push video, make sure that:
The DVR system is set up as described in
Connection and Setup
.
The DVR is connected to internet.
You have installed the EagleEyes app on your iPhone
®
, iPad
®
or Android
®
mobile devices.
For details, please refer to
Mobile Surveillance via EagleEyes
.
