CCTVPROM11
V. 03 - 17/01/2012
©
Velleman nv
8
User profile selection
•
It is possible to log on to the system as administrator ( ) or regular user ( ). An icon is shown in the
status bar.
•
Switch between user profiles by clicking on the icon ( or ). The lock-icon ( ) is now displayed.
•
Click on the lock-icon and enter the password of the desired user profile.
Video output
•
On both VGA and monitor outputs the video signal is present simultaneously.
•
To switch to the other display, go to ADVANCED CONFIG and set the DISPLAY OUTPUT PATH.
Note:
the DVR must be reset for the setting to take effect.
•
It is also possible to select a display at start-up of the DVR. Press the left key (
) on the front panel
during start-up to use the CRT monitor; press the right key (
) during set-up to use the VGA output.
8.
Operation
Display
The following image shows the screen layout.
A
system date and time
B
general system status
C
available HDD capacity
D
channel status
live audio channel enabled
playback audio channel enabled (yellow)
audio channel disabled
timer recording
digital zoom on (yellow) / off
USB mouse connected
USB flash drive connected
Hard disk overwrite (default)
key lock on
PTZ mode
sequence mode
motion mode
recording mode
alarm mode
administrator logged on
operator logged on
LAN connected / Internet connected / no network connection
Note that actual screen icons might differ slightly from the ones shown above.
All manuals and user guides at all-guides.com
