CAMSET2 GB
3
OPERATION
_________________________________________________________________
1. When you push power ON/OFF to switch on, the power indicator will light up.
After a few seconds, the monitor screen will show the picture.
2. Select "camera" (C1 or C2) by pushing the camera selector switch (C1 or C2).
3. Adjust the volume control clockwise or counterclockwise to either increase or
decrease the sound level.
4. This is a two-way talking system : there is communication between the camera
and the monitor. You can hear the sound from the camera without pressing
the "talk"-button. But if you want to talk to a person at the other end of the
camera, you should keep the "talk"-button pressed down while talking. Do not
release the button until you are finished.
5. When 2 cameras are in use, press the "AUTO" camera selector switch to
automatically switch back and forth between the 2 cameras.
6. Adjust the "TIME"-control to change the display time of the picture between
camera 1 and camera 2. The cycle time can be adjusted from 1 second (min.)
to 30 seconds (max.)
7. Adjust the contrast and bright controls to change the picture's contrast and
brightness.
8. To record the audio and video signals from the camera : connect the
audio/video output jacks at the back of the monitor to the VCR's audio/video
input jack by using the standard audio/video cable with RCA plugs.
