CAMIP5N1
V. 05 – 04/06/2015
15
©Velleman nv
Reset the device to factory settings
Selecting
OK
will clear the memory and reset the device to factory settings.
All settings will be cleared:
user settings
mail and FTP settings
alarm schedule
…
Tip: backup the system configuration before resetting your device to factory settings.
11.20
Reboot Device
Reboot the camera
Select OK to reboot the camera.
This will reset the system time.
You can adjust date and time in the
Date&Time settings
page.
11.21
Log
The log contains an overview of everyone who accessed the IP camera. The log is cleared if the camera is
rebooted.
12.
Additional information
12.1
Password
The default administrator login is
admin
without a password. To enhance security, a new administrator
password should be set as soon as possible (see above).
If you have lost the administrator password, you can reset the camera to factory defaults (
admin
, no
password) by pressing and holding the
RESET
button at the bottom of the camera for about 5 seconds.
When doings so, all other user settings will be lost as well.