CAMIP5N
V. 02 – 22/05/2012
5
©Velleman nv
2.
Follow the instructions on the screen. Click
Next
to start the software installation.
3.
Click
Next
again.
4.
To finish software installation, the computer must be restarted. Select
Yes I want to restart my
computer now
and click
Close
.
After rebooting, the IP Camera Tool icon appears on the desktop.
Mac
1.
Locate and open the folder “For Mac”.
2.
Open the folder “IP camera Tool” and copy the tool to your Mac to use it.
8.
Software set-up
Make sure all connections are properly made (see also §6) and double-click the
IP Camera Tool
icon to start
the software.
8.1
IP Camera Tool
1.
The software starts searching for cameras over the LAN. Three situations can occur:
o
No cameras are found on the LAN. If after 1 minute the software does not detect any cameras, check all
cabling of the system and make sure the camera is powered.
o
Cameras are found and listed (see image below).