CAMCOLD16 - CAMCOLD16H
10/04/2009
4
©Velleman Components nv
®
•
Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
4.
Overview
Refer to the illustration on page
2
of this manual.
A
light sensor
E
positioning ring
B
IR night LEDs
F
fixation ring
C
lens
G
mounting plate
D
lens enclosure (ball)
5.
Installation
•
Choose the location for the dome camera, keeping following
guidelines in mind:
•
Do not install the camera in locations where extremely high or
low temperatures, high humidity, water vapour or steam, dust
or excessive vibrations may occur.
•
Avoid mounting the camera near high electro-magnetic fields as
this will influence image quality.
•
Do not aim the camera at the sun or other extremely bright
objects or reflections.
•
Hold the mounting plate
[G]
and unscrew the fixation ring
[F]
by
turning it counter clockwise. Note that the lens enclosure
[D]
and
positioning ring
[E]
are also released.
•
Use the mounting plate
[G]
to determine the position of the
mounting holes.
•
Guide the power and video cable
though one of the cable slots
and mount the mounting plate
[G]
on the ceiling or wall with four
mounting screws.
•
Insert the lens enclosure
[D]
in the positioning ring
[E]
and slide
the fixation ring
[F]
over both. Point the camera towards the
desired field of observation and screw the fixation ring
[F]
back on
the mounting plate
[G]
.
•
Connect the video connector
[1]
to a monitor (not incl.) or a
sequential switcher/quad splitter (not incl.) when connecting
multiple domes.
•
Connect the power connector
[2]
to a 12VDC power supply (not
incl.)
