![background image](http://html1.mh-extra.com/html/velleman/camcolbul16/camcolbul16_user-manual_861707004.webp)
CAMCOLBUL16
19/01/2009
4
Velleman
®
5.
Overview
Refer to the illustrations on page 2 of this manual.
A
heat-resistant fixed ring
F
zoom adjust
B
heat-resistant waterproof ring
G
focus adjust
C
2mm tempered glass
H
4~9mm varifocal lens
D
heat-resistant fixed ring
I
vandal-proof housing
E
light IR LEDs
J
sunshield
1
video
5
cable exit - bottom
2
power
6
hex screw – vertical position
3
cable exit - backside
7
hex screw – horizontal position
4
cable exit - top
6.
Installation
•
Choose the location for the camera, keeping following guidelines in mind:
o
do not install the camera in locations where extremely high or low temperatures or
excessive vibrations may occur.
o
avoid mounting the camera near high electro-magnetic fields.
o
do not aim the camera at the sun or other extremely bright objects or reflections (e.g.
metal doors).
o
The connection cables run at the inside of the mounting bracket, and leave at the
backside
[3]
(default). They can be re-guided to leave via the top
[4]
or bottom
[5]
of
the mounting bracket.
•
When the connection cables need to go through the wall, a hole of at least Ø20mm (max.
Ø35mm) must be foreseen at the mounting location.
•
Guide the cables though the cable hole when applicable. Mount the mounting bracket on the
wall using 4 screws (included). Note that the camera must be resting on top of the
mounting bracket.
•
Release hex screws
[6]
and
[7]
(hex key included) and point the camera to the desired
field of observation. Tighten hex screw
[7]
to secure the horizontal position and hex screw
[6]
for the vertical position.
•
Connect the video connector
[1]
to a monitor (not incl.).
•
Connect the power connector
[2]
to a 12VDC power supply (not incl.).
•
Manually adjust the zoom with screw
[F]
and the focus with screw
[G]
. These screws are
located at the back of the camera under protective caps. After adjusting, replace the
protective caps.
•
The sunshield can be mounted or dismounted by sliding the sunshield towards the front of
the camera.
7.
Technical specifications
IP rating
IP66
scanning system
PAL
pick-up element
Sony CCD sensor
image size
1/3"
number of pixels
500(H) x 582(V)
resolution
420 TV lines
min. illumination
0.8 lux (IR off) / 0 lux (IR on)
max. IR projection distance
± 70m