CS-770 GB
2
ASSEMBLY AND BATTERIES
Your CS-770 comes to you broken down for packaging. To assemble, insert the thickest pipe with
drilled holes into control box underside and secure with the 2 bolts provided, slacken the knurled
locking collar on the top stem and insert the middle stem.
Insert the lower stem in the middle stem and tighten locking collar. Twist the head cable around the
stems until the slack is taken up, then connect the head to the lower stem using the bolt provided.
Height adjustment can be achieved by slackening off the knurled locking collars and extending or
shortening the whole assembly.
BATTERIES
Before you can operate your CS-770 you need to purchase 4 x PP3 batteries, preferably by a well
known manufacturer.
N.B. Over 80% of all faults occurring with metal detectors can be traced to poorly fitted or faulty
batteries - even new ones !
By removing battery covers (F and G) access is gained to the battery compartments. To remove
battery covers gently depress ribbed and slide forward. Connect batteries firmly onto battery clips
and replace battery covers.
Battery life will be longer if headphones are used.
Diagram 2
