Veleon E-Motion, User Manual

Page: 31 / 98

Maintenance
25
Adjusting the tilt lock
The easiest way to adjust the tilt lock is to turn the adjusting screw (1) on the grip shift lever (Figure
6-22). This can be necessary when the tilt lock does not limit the tilting as usual. The adjusting should
be done very carefully. If it is not sufficient to adjust the tilt lock with the adjusting screw, the Bowden
cable can be adjusted at the tilt lock wedge itself (Figure 6-23). It is recommended that this is done
exclusively by a specialist dealer. To adjust the tilt lock this way, loose the screw (2). This causes the
cable to loosen too. After adjusting the height of the wedge, the Bowden cable can be tightened, the
cable is then secured by fastening the screw.
The pins on which the wedge runs must be lubricated regularly! If the wedge does not move smoothly
up or down, or is difficult to release from level 3, it is time to clean and lubricate the bolts or to have a
maintenance done.
Figure 6-22: : Tilt lock adjusting screw (1) on the grip shift
lever
Figure 6-23: Hexagon screw (2) on the tilt lock
2 Maintenance
The pins on which the wedge runs must be cleaned and lubricated regularly!
2
2
1