72
73
Owner’s Manual
CRUISE CONTROL
1. Activate the console by pressing on the ON button for 3 seconds.
2. Press both the «+» and «-» button at the same time for 3 seconds and the
odometer will be set back to zer
It is the only programmable function. To make sure that the electric bicycle
functions properly, It will be impossible to make any other modifications.
HOW TO PUT THE ODOMETER BACK TO
ZERO?
MANUAL MODE WITHOUT
PEDAL-ASSISTANCE OR THROTTLE
To switch the motor OFF, you can press the I/O button on the Control Panel or
turn the key to the OFF position on the battery.
To cut off the electrical power entirely, the key must be removed.
Note that as soon as you use the brakes, the motor turns off automatically and
the chosen functions are deactivated.
Push the throttle (on the handlebar) until the desi-
red speed is attained, maintain this speed for a few
seconds then press and hold the (-) button until you
see a « C » in the LCD panel then you can release the
button and the Cruise control is activated. You can
now release the throttle handle and the speed will
be maintained.
To deactivate the Cruise Control, simply press one
of the brake levers.
Cruise Control
