37
Knee angle and ankle angle
For setting the knee angle and the ankle angle loosen the screw(1) from figure 28. As a result the foot
and leg support can be brought to motion. Adjust the position from the foot and leg support and
tighten the screw(1).
Figure 28: Adjust of the angle of the foot support
The height of the foot support can be adjusted by following the steps that are sown on the next
page. (figure 29).
Step 1: Set the footplate in the upward position
Step 2: By carrying out step 1 the screws(2) will come free. Loosen the screw a few turns.
Step 3: Because it is turned loose the inner tube is loose from the outer tube. Position the
foot support on the desired height and tightened the screws(2) again.
