Installation Manual VMBEL-series
VMBGP-series
Jan 2024
Page
5
of
6
Now firmly push the Velbus control panel into the frame, starting from one corner, for ease of
alignment and to focus your pressure onto each of the four small locating pins.
The Velbus control panel should be fully seated against the wall.
Lastly, gently remove the protective film from the Velbus control panel.
The Velbus control panel is now installed and is ready to be configured with the Velbus
configuration software Velbuslink. Go to
https://www.velbus.eu/downloads
version of Velbuslink.
Only Velbuslink 11.x.x or later is compatible with the VMBELxx-x-20 and VMBGPxx-x-20 series.