6
3
1.0 inTRoDucTion
Dear customer
we would like to thank you for purchasing a VELA Tango. we are sure that it will continue
to give you pleasure well into the future. The directions for use contain useful information
about positioning, operating, maintenance and technical data, etc.
This user manual applies to the VELA Tango 300.
important
Please read this manual carefully and keep it for future reference. It must always be
readily available to the user. This user manual must always be kept with the chair.
The manual is also available on VELA’s website: www.vela.eu. If you have any questions,
please contact VELA.
The chair is made by VELA, Vermund Larsen A/S, Goeteborgvej 12, 9200 Aalborg SV,
Denmark. The VELA Tango is designed for indoor use by people with slight disabilities.
1.1. SaFETY
This chair carries the CE mark and complies with all current EU regulations. This chair
carries the CE-mark and complies with all current EU regulations. Remove the CE-mark,
when rebuilding the product or when using other than original VELA spare parts and
fittings.
1.5 VEla Tango 300 uSER’S Manual
SiTTing hEighT
The VELA Tango 300 features either electric or gas height
adjustment. VELA Tango 300 is also available with a fixed
height that cannot be adjusted.
gas adjustment of sitting height
Push up the handle on the right side.
Electric adjustment of sitting height
Sitting height is adjusted electrically by pushing the button
on the armrest.
The height function may be used for no more than two
minutes at a time, after which it must rest for eighteen
minutes.
SEaT DEpTh
The depth of the seat is adjusted by loosening the Unbrako
screws under the seat (near the backrest), after which you
can push the backrest forward.
BackREST TilT anD BackREST hEighT
The height of the backrest can be adjusted by loosening the
Unbrako screws.
The backrest can be tilted by loosening the Unbrako screws
on the back plate and adjusting it to the desired angle.
Remember to tighten the screws again securely.
The height of the backrest can also be adjusted by loosen-
ing the Unbrako screws.
BRakE
VELA Tango 300 has a central brake that is activated by
means of a handle on the right or left. The handbrake is
pushed forward to lock the wheels, and back to unlock
them.
DiSTRiBuToR: