4
1.1. SAFETY
This chair is CE marked
and complies with current
EU regulations. The chair is
manufactured by:
VELA, Gøteborgvej 8-12,
9200 Aalborg SV, Denmark.
VELA Tango 500/510 with electric
operation complies with all EMC
requirements according to IEC
60601-1-2.
1.1.1. USE
VELA Tango is designed for indoor,
seated use.
::
The chair is not built to stand on
::
To ensure the safe transfer of a
person to and from the chair the
brake must be activated.
All versions of VELA Tango 500/510
have been tested and approved for
users weighing up to 160 kg.
Note
: People using a harness
in VELA Tango must always be
supervised while the harness is in
use.
1.1.2. TRANSPORT
When transporting the chair in a
car or aircraft or by other means of
transport, always use the brake. The
chair is not approved as a passenger
seat during transport and should not
be used as such.
Please observe the following
transport specifications:
Temperature: - 40°C to + 70°C
Humidity: 15-95%
Air pressure: PPP up to 1000 meters
above sea level
1.2. WARRANTY
VELA provides warranty by the
laws and regulations which are
debt in the country the chair is
bought in. The warranty applies
only when using original spare parts
and accessories and when any
adjustments are made by authorized
service technicians.
Note:
Exceptions may be made
through special contractual
agreements directly with VELA.
VELA assumes no responsibility for
damage to the product or the user
that occurs due to:
::
Transport
::
Misuse
::
Normal wear and tear
::
Incorrect use
::
Use of parts other than original
spare parts and accessories
::
Adjustments carried out by
unauthorized service technicians
GENERAL