4
1.1. SAFETY
This chair is CE marked and com-
plies with all current EU regulations.
The chair is manufactured by:
VELA, Gøteborgvej 8-12,
9200 Aalborg SV, Denmark.
VELA Tango ELectric complies with
all EMC requirements according to
IEC 60601-1-2.
1.1.1. USE
VELA Tango is designed for indoor
use by seated persons.
::
The chair is not built for standing
on.
::
To ensure the safe transfer of a
person to and from the chair, the
brake must be activated.
VELA Tango 300EL and VELA Tango
300 with fixed height are approved
for users weighing up to 200 kg.
VELA Tango 300 with gas spring has
been tested and approved for users
weighing up to 175 kg.
Note: People using a harness
in VELA Tango must always be
supervised while the harness is in
use.
1.1.2. TRANSPORT
When transporting the chair in a
car or aircraft or by other means of
transport, always use the brake. The
chair is not approved as a passenger
seat during transport and should not
be used as such.
Please observe the following
transport specifications:
Temperature: - 40°C to + 70°C
Humidity: 15-95%
Air pressure: PPP up to 1000 metres
above sea level
1.2. WARRANTY
VELA provides a warranty in accord-
ance with the Danish Sale of Goods
Act. The warranty applies only when
using original spare parts and acces-
sories and when any adjustments
are made by authorised service
technicians.
VELA assumes no responsibility for
damage to the product or the user
that occurs due to:
::
Transport
::
Misuse
::
Normal wear and tear
::
Incorrect use
::
Use of parts other than original
spare parts and accessories
::
Adjustments carried out by unau-
thorised service technicians
GENERAL
