Vela Tango 100ES, User Manual

Page: 6 / 12

VELA
TANGO
100S
VELA
TANGO
100ES
6
1.6. USER MANUAL
Replacement of the gas spring may only be performed
by the service support team from your dealer or a
skilled technical person.
1.6.3. ADJUSTMENT OF SEAT HEIGHT (VELA TANGO 100S)
Adjust the seat height by pulling up the front lever placed at
your right hand.
1.6.2. ADJUSTMENT OF SEAT HEIGHT (VELA TANGO 100ES)
Is operated from the flip-up height control pad located ot the
underside of either the right or left armrest.
Note
: VELA Tango 100ES is also available with height
adjustment via hand box (i.e. if caregivers must be able to
adjust the height).
1.6.4. ADJUSTMENT OF SEAT TILT
Adjust the seat tilt by pulling up the middle lever placed at your
right hand.
2.
1.
3.
1.6.1. ATTACHING THE BACKREST
The lever (1) for backrest adjustment (see section 1.6.6.) must
be in open position. Put the backrest rod through the protective
cap and into the hole. Tighten the lever afterwards.
Insert the end cap (2) in the bottom of the backrest rod.
Insert the plastic knop (3) into the small hole on the left side of
the backrest rod.