background image

7

1.5. SAFETY

This chair is CE marked and com-
plies with applicable EU regulations. 
The chair is manufactured by: 
VELA, Gøteborgvej 8-12, 
9200 Aalborg SV, Denmark.

The VELA Tango with electrical func-
tions meets all safety requirements 
according to IEC 60601-1, including 
requirements for EMC according to 
IEC60601-1-2. 

1.5.1. APPLICATION

This chair is an indoor chair inten-
ded for sitting and private use.

::

  The chair is not built to stand on

::

  The wheel brake must always be 

activated when sitting down or 
standing up

All variants of this chair are tested 
and approved for a maximum load 
of 160 kg.

IN GENERAL

1.4. LABELS USED ON THE CHAIR

Warning 

Risk of shear and squeeze:
Keep hands and fingers away from moving parts

Icon 

Read ”Instruction For Use” before use

Icon 

Part used:
Type B cf. IEC60601-1
covering the following areas of the chair: 

Labels 

60 x 22,5 mm

This label only  applies to
chairs with electrical functions:
The chair is IP21 approved, which corresponds
to protection against water droplets, as well as
against touching dangerous parts with a finger.

Labels on the chair should be read at a distance of approx. 40 cm under 
normal daylight conditions. 
For labels related to the operation of the chair, please refer to section 2.0. 

IdentNo.:

<Model name>

<Model ref no.>
<Manufacturer>
<Adress>
<Webpage>

<IdentNo.>

<Safe Working load>

<Production date/order no.>

<ME Equipment mass>

Follow instructions

for use

IP21

EN60601-1

Blade fuse: 10A/32V,  

0.5A

Input:
24V

Duty cycle: 10%, 
max. 2min/18min Storage limits 

-20°C 

60°C 

Summary of Contents for Tango 100 Arthrodesis

















Reviews: