4
Use
Read the user manual carefully before using, cleaning or maintaining the VELA Person Lift.
Use
The maximum load must never be exceeded. If the load is exceeded during use, and overload
alarm will beep. Unload the device and reset by activating the emergency stop.
Use
The VELA Person Lift must only be used for lifting people.
Use
The VELA Person Lift must not be used during charging.
Use
The lift does not include an emergency lowering device, and must therefore only be used when
supervised by an assistant.
Use
The red emergency button must be available for both the assistant and the user, if the user is
operating the lift.
Use
Check that all lifting brackets and straps are placed correctly before the lifting function is activated.
Use
If an error occurs on the lift during use, you must discontinue using the lift and contact VELA/your
VELA dealer for reparations.
Use
Do not use with low battery.
Use
Charge 24 h before use.
Use
Charge regularly, even when not used to prolong the battery life.
Use
As a lifting device, the VELA Person Lift must be subjected to annual inspection and the body
support must be inspected biannually
Use
Use only when mounted correctly on brackets/suspences approved by VELA or made according to
the VELA Mounting Guide
Use
Do not let the user sit in the body support unattended.
Use
Before lifting, you must ensure that the user cannot be pinched.
Use
Activate the emergency stop when the lift is now used to save standby power.
Use
If electrical interference is experienced, seperate the electical apparatus until the interference is
diminished
Important:
In case of overload the VELA Person Lift will emit an alarm (a be-
eping noise). In this case the lift cannot raise, only lower for safety reasons. Re-
set the alarm by activating the emergency stop. Afterwards the lift will function
normally again. Remember to remove the cause of the overload alarm prior to
starting up the VELA Person Lift again. If the alarm continues service is needed.
1.1. WARNINGS