3
INTRODUCTION
Dear customer,
Thank you for choosing VELA Latin 100/200, which is certain to
give you years of enjoyable use.
The user manual contains useful information on set-up,
operation, maintenance, technical data etc.
This user manual refers to the VELA Latin 100 or VELA Latin 200.
Important
Please read this manual carefully and keep it for future refer-
ence. It must always be readily available to the user. It is a good
idea to keep the user manual with the chair.
The manual is also available on VELA’s website:
www.vela.eu
If you have any questions, please contact your local VELA
distributor.
You can also find information about VELA Latin 100/200 on
VELA’s website: www.vela.eu
Safety
This chair carries the CE mark and complies with all current EU
regulations.
The chair is made by
VELA, Vermund Larsen A/S,
Gøteborgvej 12, 9200 Aalborg SV, Denmark.
The VELA Latin 100/200 chair is designed for indoor use.
It is not intended for standing on.
VELA reserves the right to make changes to this document.
6
USER MANUAL VELA Latin 100/200
SEAT HEIGHT
The height of the VELA Latin 100/200 can be
adjusted by pressing the height adjustment leaver
located on the right-hand side beneath the seat.
The gas spring should only be replaced by a VELA
technician or other qualified person with relevant
experience.
BACK TILT
To change the back tilt use the lever on the right-
hand side beneath the seat
BACK HEIGHT
To change the position of the back, use the lever
which is placed on the backside of the chair.
SEAT TILT
To change the seat tilt, use the lever on the right-
hand side beneath the seat.
ARMREST (ACCESSORY)
The height is adjusted by loosening the lever on the
armrest.
The width is set by loosening the lever under the seat
and adjusting the width. Remember to tighten the
levers again.
Height adjustment
Back tilt
seat tilt
Back height
VELA Latin 200 only:
The back angle on VELA
Latin 200 can be locked
in the needed position by
adjusting the lever on the
back.