background image

10

fooTresTs
e-fooTresTs, sTandard

The VELA Blues 100 has, as standard equipment, e-footrests.

 

The 

VELA Blues 100 can also be equipped with a set of adjustable 
footrests attached to the seat frame.  The footrest can be moved 
out of the way when entering and exiting the chair by lifting the 
bar approx. 3 cm up and swinging the footrest around the side at 
the same time. The depth of the footrest can be adjusted using the 
tool for adjusting the sliding bar in the seat frame either forwards 
or backwards.  The footrest can be adjusted to suit leg length by 
regulating the length bar in its hollow tube. The foot angle can be 
adjusted using the tool in the swivel part of the footplate.

heel sTops

It is possible to fit heel stops to the footrests.

folding s-fooTresT WiTh plaTe (opTional)

The footplate saves space and follows the height of the seat when 
the electric seat lift function is used. The length of the footrest is 
regulated by loosening the six-sided bolt on the bar down by the 
footplate. The desired position for the footplate is selected and the 
six-sided bolt is tightened again. The s-footplate can be folded up 
when entering and exiting the chair.

adJusTMenT of Chair baCK/seaT depTh

The chair back is released by loosening the fastener on the chair 
back bar located in the back under the seat (A). The chair back is 
placed in the desired position and then tightened again.
The chair back bar is equipped with a pull stop to ensure that the 
chair back bar is correctly anchored in the chair back holder.
Destruction of the pull stop and extreme pressure on the chair 
back bar can cause damage to the chair back holder.
The back angle is adjusted by pulling the lever (B), and locking 
simply by removing your grip on the lever.

hip sTrap

It is also possible to fit a hip strap. 

plaCeMenT of ConTrol box
parallel fiTTings

The control box is mounted on either the right or the left side 
according to customer specifications. The VELA Blues 100 is 
delivered with parallel fittings as standard, making it possible to 
slide the control box along the armrest so that the chair can e.g. 
come all the way up to a table. Be careful with your fingers when 
sliding the control box back/forward using the parallel fitting.

eMergenCy braKe

The powerchair can be stopped immediately by turning it off: 
Press the I/0 button.

Warning!

 When the powerchair is turned off, the electric brake is 

activated immediately. This will cause a very sudden stop. The chair 
must therefore only in emergencies be turned off while it is still 
moving. There is a risk of the user falling out of the chair and/or of 
the chair tipping over!

release

Should it be necessary to manoeuvre the chair manually, the electric 
brake and motor can be released by turning the two handles 
located on top of the motor blocks clockwise to 

note!

 It is not possible to operate the VELA Blues 100 powerchair 

electrically when the release function is in use. Turn the two 
handles back to                immediately after manoeuvring the chair.

Warning!

 Do not attempt to manoeuvre the chair manually when 

the motor is still in gear, when the chair is on a sloping surface, on 
a landing or in a similar situation where the chair might start rolling 
or lose control. 

sTanding sTill and parKing

Always use the I/0 button to turn the powerchair off as soon as 
you no longer want to drive it.

noTe!

 When the chair is turned on, power is consumed from the 

batteries. It is therefore a good idea to turn off the chair when it is 
parked.

7

HALTED               rELEASED

a

b

Summary of Contents for Blues 100

















Reviews: