RECYCLING
For electrical products sold within the European Community.
At the end of the electrical products useful life it should not be disposed of
with household waste. Please recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice in your country.
INSTALLATION
Installation must be carried out by a licensed and authorised person only.
Only connect the appliance to a power supply that conforms to the specification
stated on rating plate.
This heater must be installed according to the minimum installation clearances shown in
the diagrams.
Mark and drill the mounting holes on the ceiling or wall.
Attach the mounting bracket to the ceiling or wall.
Bring the heater up to mounting bracket. Insert M6 bolts in the slots on the heater and the
holes on the mounting bracket. Lock into position with M6 nuts.
Rotate the heater to require angle and lock into position with the bolt and nut on the wall
bracket.
Do not position the heater at an angle of more than 90° and less than 45°.
Plug in to turn the heater on.
WIRING DIAGRAM
6
220-240V AC
50/60 Hz
L
N
PE
HEATING ELEMENT