37
- check that the scale is suspended on a firm, not spring-biased construction
- the bird is moving too much, select the manual saving mode
7.
The data on the display is hardly readable
- change the contrast of the display
- select display mode
Large
8.
The scale cannot be switched off
- hold
longer than 5 seconds
9.2. PC
1.
After downloading data from the scale, some files in the
Scale
panel are missing
- missing files are empty – they do not include any weighed values
2.
After downloading data, the statistics does not show any new files or just one file
- save data in the panel
Scale
using the
Save all weighings
button
3.
After downloading and saving data, the data do not display in the
Statistics
panel in the
Last weighings
tab
- the downloaded data were weighed several days ago. Check if the data is displayed in the
Weighings
panel and to view the data, use the panel
Statistics
, and the
Selected weighings
tab or panel
Flocks
4.
The
Flocks
panel, tab
Current flocks
, tab
Statistics
is empty
- check the weighing date and date of the flock start. Weighings with the dates lower than the start date
of the flock are not displayed
5.
The
Flocks
panel, tab
Selected flocks
, tab
Statistics
is empty
- check the weighing date and date of start of the selected flocks. Weighings with the dates lower than
the start date of the flock are not displayed
6.
Graph with just one point is displayed in the
Flocks
panel, tab
Graph
- the respective flock was weighed only once. After completing further weighings (in the following
days), the graph will be displayed correctly
7.
The graph in the
Flocks
panel does not include the option of the growth curves.
– the selected flocks do not have the growth curve preset. Complete the setting of the growth curve in
the
Flocks
tab, see chapter 8.7.1.
