Monitor menu operation instructions
F
F
F
F
Please perss pair key
on camera side
20
MODE
5
-
+
5
-
+
5
-
+
5
-
+
5
-
+
4
SPLIT3-4
SPLIT234
1 2
SPLIT1-2
H
-
SPLIT
OFF
3
QUAD
ON OFF
ON OFF
NTSC PAL
Display
Device
Color TFT-LCD
Size
7" Digital Screen
Operation Frequency
2400 ~ 2483.5MHz
Receiving Sensitivity
≤-
86dBm(1MHZ QPSK MD300RE)
Resolution
1024
×
(RGB)
×
600
View Angle (LR/UD)
L/R:
6
0/70 U/D:
6
0/70
Contrast Ratio
500:1
2
Luminance(cd
/
m
)
60
0
Response Time (ms)
25
Load Dump
DC 12+87V/400ms
Operating Temperature
-20
℃
～
+60
℃
Storage Temperature
-30
℃
～
+80
℃
operating voltage range Supply
DC8V
～
32V
（
5W Max
）
Dimension
(
L x W x T)
(185X122X28mm)
Transmission Power
18dBm with Power control
Camera
720P Wireless waterproof and shockproof digital camera truck
Image
Pick
-
up
Device
1
/
3" Color
CMOS
Picture
Elements
1280
(H)X
960
(V)
Horizontal
Resolution
720
P
Minimum illumination
0.1 Lux
View Angle
45°
Waterproof rating
IP6
9K
Shockproof R
ating
10G
operating voltage range
DC12V
Dimension
127(W) x 37(H) x 24.5(D) mm
Digital wireless system technical Parameters
The system maintenance must be maintained by professionals, please do not open and
improve the system!
The system is only for the safe operation of equipment and not responsible for accidents!
This manual is for reference only. if unknown, or any changes, we will give no notice.
The final interpretation right belongs to the manufacturer
Warning
Line of Sight Range
≤100M
3
)
Mirror settings:
Set the four states of the CAM1/CAM2 channel image:
Positive image, mirror image, vertical flip image and vertical flip
mirror,Default state: Positive image.
1
)
Code settings:
Enter the menu, check the code options menu, press the
confir
mation button to start the code, display the code.Character
Please perss pair Keyon camera side 20, pair code timeThe
countdown is 20 seconds, the camera is recharged and waited
for 5~10 seconds to display and photograph.The machine conn
ects to the communication and displays the image normally.
2
)
Image settings:
Enter the menu, select the image settings options
menu, press
the confirmation button to enter the
image settings:
1
.
Brightness setting: 0-9 (left / right key adjustment step size)
2
.
Contrast settings: 0-9 (left / right key adjustment step size)
3
.
Color settings: 0-9 (left / right key adjustment step size)
4. Volume control: 0-9 (left / right key adjustment step size)
Image
Setting
Multi screen
mode setting
On the code
Function
settings
Mirror
settings
Automatic
conversion settings
4
)
Automatic switch mode settings:
1
.
Set up CAM1/CAM2 channel automatic switching mode to
turn on and off
；
2. Set CAM1/CAM2 channel automatic
switching mode time value 5~45,Default state: 5S.
5
)
Function settings:
1
.
Switch between NTSC and PAL
，
Default state:NTSC
；
2
.
Set up the LED screen environment light source mode to
turn on and off
；
3
.
Reversing scale setting: set up CAM2 channel reversing
scale open and close.
6
)
Multi screen mode display settings:
1. Settings screen can be switched to two-screen display,
open by default.
