VeinSight VS500, User Manual

Page: 20 / 28

VS500 VEIN FINDER USER GUIDE
18
5. Battery
5.1 Built-in Battery

The built-in battery is inside the imaging unit.

Before using device for the first time, please charge the battery fully.

Avoid completely discharging of the battery, and recharge in time when the battery
is not completely used up.

When the battery enters the protection mode because of output short circuit or
over-discharge, the battery needs to be charged to recover.

Check the battery every 2 months to see if the charging and discharging work
properly. If there is any abnormality, please contact the dealer or manufacturer in
time.

The used batteries should be properly disposed of according to local regulations.

Please use the original adaptor to charge the battery.
Note : When the battery is less than 3%, the device beeps continually. Short press any
button (about 0.5 seconds) will stop the beep. If device is rebooted in low battery, the
“beep” sound will start again before the battery is charged.