Veilux VR-412D1 & VR-412C Compact DVR’s
www.veilux.net
72
Operating Instruction & User’s Guide
※ Downgrading to a previous version is not supported.
※ The upgrade information window will then appear within 15 seconds.
⑥
Read the information and select {Yes} to start the upgrade gradually. Select {No} to return to
{System}
mode.
⑦
After the update is completed, the system will be rebooted.
⑧
The system will automatically start. Upgrade is then completed.
⑨
Move to
{Menu}
{Others}
{Product Information}
{3. Software Version}
to check the software
version.
※all setup data are a fixed value in
{Menu}
{Setup}
{System}
{6.
Upgrade}
{Setup}.
6-7-8 initialization
①
Move to
{Menu}
{Setup}
{system}
{7. Initialization}.
②
Select {Yes} when initialization (Yes/No) Window appears.
Note that all setting data will be initialized.
※ It goes back to Factory Default Value.
6-7-9 RS232C Port
①
Move to
{Menu}
{Setup}
{System}
{8. RS232C Port}
.
②
On the selection window, select the device using the arrow keys and the Select button.
6-7-10 Alarm
Alarm is to notify occurrences such as events[Sensor, Motion and Audio] and system incidents[Video Signal
disconnected/HDD full/HDD fail/HDD warning] to [Alarm/E-mail/Relay01/System check].
①
Move to
{Menu}
{Setup}
{System}
{9. Alarm}.
②
Select [Alarm/E-mail/Relay01/System Check]. The user can select all by ticking as shown below.
[Figure 6-61. Alarm]
※ System Check
System Check is to pop up the System Check Window on the monitoring screen. It indicates
[Video Signal disconnected/HDD full/HDD fail/HDD warning].
Summary of Contents for VR-412D1
Page 1: ... ...