Veilux User Manual for VPIP-D118-/O, D126X-I/O, D127X-I/O, D133X-I/O,
D136X-I/O, D136X With WDR-I/O, D137X-I/O
I= Indoor
D= Outdoor
Rev.1.0 (April 2011)
35
Website: www.Veilux.net Phone# 1-800-510-6528
II. Connection via NVXR-64
NVXR-64 is a CMS program to connect several IP Cameras and/or Video Servers. Once you run
NVXR-64 after installing on the remotely located PC, you can monitor real-time Video/Audio on the PC
by accessing to IP Camera via IP Address assigned to each IP Camera. For the access to Product by
using NVXR-64, you have to configure all required information at NVXR-64.
For the detail, please refer to
[NVXR-64 User Manual].
4. Initial Configuration by connecting Admin Mode
All Parameters of Veilux VPIP-D1XXX-O / VPIP-D1XXX-I is initially set as factory default. So you must change
them with appropriate value to your network configuration by accessing via Admin Tool. Admin Tool Access
Method is as below.
Http://[IP Address]:[HTTP Port No.]/ admin.htm
Admin Tool Access ID / Password:
root / admin
. As it is Default Value, please change them. For the detailed
Some units also may have
User Name and Password is set as ‘
root
’ and ‘
dw2001
’
Fig 4-3. NVXR-64
Admin Page Button
