•Do not expose the monitor to rain or other sources of water,steam,or
moisture.
•Do not place foreign objects on the monitor or its cables.
CAUTION: To avoid the risk of minor or moderate personal injury or
damage to the
monitor:
• Never wall-mount the monitor without the locking mechanism in place.
• Use an anchoring system appropriate for the weight of the product.
• Consult a construction professional before attempting to hang the unit on
the wall.
To avoid the risk of glass breakage which may result in minor or
moderate
injury:
• Handle the monitor with care to avoid breaking the touch screen sensor.
The display contains glass parts. Dropping the display may cause the
glass parts to break.
• Do not place foreign objects on the monitor.
Important
Notes:
•Plug powercord into appropriate power source & a grounded receptacle.
•When unplugging power supply cord, pull on plug not cord.
•Do not connect or disconnect this product during an electrical storm.
•Install the display in a well-ventilated area. Always maintain adequate
ventilation to protect the display from overheating and to ensure reliable
and continued operation.
•Do not expose this display to heat. Passive heat may cause damage to
the case and other parts.
•Do not install this display in areas where extreme vibrations may be
generated.For example, nearby manufacturing equipment may produce
strong vibrations. The vibrations may cause the display to exhibit picture
discoloration or poor video quality.
•Product weight varies from 10 to 24 pounds depending on the packaging,
use caution when lifting.
• Ensure that metal does not contact the touch screen.
To avoid ergonomic concerns:
Do not install the monitor in a manner or location with awkward
accessibility.Extended use may result in muscle, tendon, or fixed posture
strains. It is recommended you take periodic breaks from continuous use.
CAUTION
：
To avoid the risk of electric shock which may result in
minor or moderate
injury:
Liquid is spilled into the product or the product is exposed to rain or water.
The product does not operate properly when operating instructions are
followed.
•The product has been dropped or the case has been damaged.
•The product shows a distinct change in performance, indicating a need
for service.
Accessories
Please check the following listed accessories before installation:
Power cord 1 pcs
Power adapter 1 pcs
VGA cable 1 pcs
Audio cable 1 pcs
User manual
1pcs
Remote control 1 pcs
Installation
Viewing the connection panel
fig.1
(1) VGA : Plug the D-type15 pin VGA interface into the VGA video
Interface of the Application, and the other end into the LCD
monitor’s VGA connector.Fasten the screw.
(2) S-Video :Plug the SV signals from DVR or other equipments to the
monitor through s-video cable.
3
2
