background image

STOP

MISSING A PART?

CALL US BEFORE GOING

BACK TO THE STORE

The store where you made your purchase

Does not stock parts for this item.

If you have assembly questions or you are missing or 

have damaged parts,please call

The store where you made your purchase

Does not stock parts for this item.

If you have assembly questions or you are missing or 

have damaged parts,please call

The store where you made your purchase

Does not stock parts for this item.

If you have assembly questions or you are missing or 

have damaged parts,please call

Please prefer email contact. Due to busy lines, 

there may be a wait for calls to be answered.

1-858-324-1911

(Mon - Fri, 10:00 am to 7:00 pm EST)

you can also e-mail [email protected]  

or visit www.veikous.com

Please have the following information ready when you make your call:

Read entire assembly manual,paying special attention to the important tips and safety information .
Ensure there are no missing pieces by first separating and identifying all parts.
Make sure to check packing material for small parts that may have fallen out during shipment.
Structures are not intended for public use.The Company does not warranty any of its residential 

      structures subjected to commercial use such as:Daycare,Preschool,Nursery School,Recreational 
      Park,or any similar Commercial Application.

This manual contains helpful information concerning assembly preparation,installation procedure 

      and required maintenance.

Always keep safety in mind as your structure is being built.
Keep these instructions for future reference.

Model Number of the product located on the frond of the assembly manual
Description of the part from the parts list

Summary of Contents for PG0210-10WRD
















Reviews: