23
F-07
Input signal respond mode
selection
LED unit digit: Free stop terminal
recover mode
0: Recover to original command with
speed search function.
1:Don’t recover to original command
after free stop terminal disconnecting.
2: Recover to original command
without speed search function.
LED ten digit: UP and DW terminal
control starting frequency setting
0: Runs with UP/DW terminal
adjusting without save the frequency
record after power loss.
1: Run to last stop moment frequency
and then perform UP/DW adjusting.
2: Runs to preset frequency
［
F-70
］
first, and then execute UP/DW
adjusting.
LED hundred digit: STOP/RESE of
keypad effective range selection.
0: STOP/RESE key valid only when
under keypad control
1: STOP/RESE key valid under any
run command source
LED thousand digit: Terminal
running mode selection after fault
reset
0: Start inverter running directly after
power on in terminal control mode
1: Stop first and then start in terminal
control mode.
1001
〇
93
207H
F-08
Terminal running control mode
LED unit digit
：
Terminal control
mode selection
0: Standard running control mode
1: 2wire running control mode
2: 2 wire control mode 1
3: 3 wire control mode 2
4: 3 wire control mode 3
5: 3 wire control mode 4
LED ten digit
：
Reserve
LED hundred digit
：
Reserve
LED thousand: Reserve
0000
〇
94
208H
F-09
1 step speed setting 1X
30.00Hz
●
96
209H
