28
8.3 To calibrate the accelerometer
Turn on the Remote control,
then the turn on Q-1 Drone.
Put Switch 2 in the
“Null”
position
After the Q-1 Drone has turned on normally, toggle Switch
4 between the down and up positions quickly until the tail
light flashes quickly
29
Put switch 4 to the
“NRM”
position
Push the joysticks inwards and down as shown until the
4 LEDs under the drone turn off, then return the joysticks
to their centre positions
When the four arm lights on the
Q-1 Drone turn on again, place
the Q-1 Drone on the ground
upside down. To avoid scratching
the Q-1 Drone we recommend
that place it on a cloth or similar
item. Toggle both joysticks on the
remote together, moving them
down and inwards as before until
the lights go out on the Q-1 Drone
and then return the joysticks to the
middle position.
Summary of Contents for MUVI Q-1
Page 1: ...User Manual VQD 002 Q1...
Page 19: ...veho muvi com...
