Mini VAG505A/VAG506M/VAG506/V801
21
1. Use the
UP/DOWN
scroll button to select [
Tilt Angle sensor
calibrate
] from
Special Function
(Figure 3.1), and then press
ENTER button.
2. If the scanner to successfully communicate with the car's ECU.
3. Press ENTER button, the tool will list:
Common models
Special models
4. Press ENTER button
If failed, it shows as the following:
a “This feature is not supported for
the vehicle.” message shows on the screen.
4. Setting
Choose [setting] at the main menu. The screen will display as the
following.
4.1
Choose [Contrast Adjust] at the main menu. Then press [ENTER].
The screen will display as the following.
Press left/right arrow to set and then press [ENTER] to confirm.
4.2
Choose [Unit of measure] at the main menu. Then press [ENTER]
button. The screen will display as the following.
