Weight
EXAMPLE
YOUR VEHICLE
WEIGHTS
FRONT TARE
3,500 Kgs
REAR TARE
7,200 Kgs
FRONT FULL
13,920 Kgs
REAR FULL
20,880 Kgs
TARE TOTAL
10,700 Kgs
GROSS TOTAL
34,800 Kgs
NET TOTAL
24,100 Kgs
Calculating Front and Rear weights for two channel split weighing
1. Determine empty TARE Axle weights
Run the front axle, axle group only onto a weighbridge and note the weight.
Run the rear axle, axle group or bogy and note the weight.
2. Load & weigh each axle/group
Load the vehicle as close to its legal maximum as possible.
3. Calculate the NET axle or bogy weights using the table
Weighbridge
Weighbridge
1. In MENU, select OPTIONS, press
2. In OPTIONS menu select ‘Load’ press
3. In LOAD option press to toggle between settings
4. Select ‘CHAN on’ & Press to confirm setting
5. Split screen function is added to the MENU screen
ok
ok
O
P
T
ok
n/g
off
printer
Modes:
Load:
RS232:
20 kg
allow
off
Count:
Z/Func:
Inc:
L
O
A
D
Load & Chan Mode
CHAN on
Turn channel option ON
STEP 1
ok
ok
CALIBRATION AND SET UP - follow these steps
Enter PIN code
OOOO
P
I
N
ok
ok
S
Y
S
Enter PIN code
1234
P
I
N
Accept new PIN ‘0000’
ok
cancel
net
Configuration
Calibration
System
Display
Diagnostics
Alarms
Options
System
ok
ok
M
E
N
U
?
PIN code changed
Reset:
PIN:
Pin:
new
ENTERING PIN CODE
1 In MENU screen select SYSTEM press
2 Press
key to select PIN:
3 Press
to display PIN input screen
4 Press
& Keys to number. Press to move cursor left
5 When PIN is entered press to enter code
6 Press
to accept PIN
7 Press
to back up to MENU
8 To Set PIN, select PIN repeat 2 - 6
Note. PIN is needed for every calibration change
PIN can be reset to a new code of your choice. If PIN is lost call Service.
