January 2019
Page 33 of 35
Reset the Connect5
•
There is a reset button mounted on the Main cable. Place the reset button
with easy access for the driver
, preferably in the fuse panel
.
Normal reboot
Short press on reset button will make the
Connect5
to reboot the Linux system and
do a normal startup.
Hard reboot
Press the reset button between
2
and
5
seconds will make the
Connect5
do a hard
reboot where the power is cut before restarting.
LED
goes yellow when the hard
reboot is initiated.
Factory reset
Pressing and holding the reset button for more than
30
seconds will make the
Connect5
do a factory reset.
LED
: s is indicating this according to information under
” in this document.
When factory reset is performed the
Connect5
will reset to the version that was
used when the unit was shipped. All user/vehicle data will be erased from the box.
