3
4
5
4
3
2
6
1
Receiver Function Description
Instructions
①
②
Microphone Signal-Receiving Indicator
③
DC5V Charging Port
④
Power and Charging Indicator
⑤
On/Off Switch
⑥
1/4" audio output jack
Battery Compartment
1.Microphone
channel like CH01, CH02, CH03 and so on. When " " shows in the screen
and keeps flash, it means the battery is under low power status.
2. Receiver
Turn on the receiver and plug it into the audio outlet(Amplifier). If RF is on, mic
will work normally. When working, " " will show green and solid. When under
low power status, " " will keep flash. When charging, " " will show red and
solid. After full charging, " " will go off.
3.Pairing Method
Turn on the receiver and turn off mic first. Make sure both mic and receiver within
20" distance. Hold down the channel-adjust button of mic first, and then press
power button of mic. When screen shows " ----- ", release both buttons and wait
for seconds. If " ----- " disappears, it means pairing is successful.
Hold down power button for 3 seconds to turn on/off mic. When mic is on, press
channel-adjust button to adjust the channel. Then " " on the screen will show
Note: When work with 2 sets or more simultaneously, please make sure
mics are set with different channels.
Note: When both mics turn on, RF will show green and red light at
the same time. Mic A(CHA)
shows green light and Mic B
(
CHB
)
shows red light.
