Version 0.4
26 February 2004
Page 3 of 33
For use with Vega 50 10 FXO – H.323 version 09.01.05.2 T004 or greater.
© 2004 VegaStream Ltd.
1. Connect your Vega to LAN, telephone lines and Power
LAN
Power Switch
AC Power
Serial (RS232)
CH 1, FXO 1
CH 8, FXO 8
CH 10, FXO 10
CH 9, FXO 9
Before installing your Vega, ensure that you read the VegaStream VoIP Gateways Safety and
Compliance Information document.
LAN:
Using the yellow booted cable connect the LAN port on the Vega to a standard or fast Ethernet hub or
switch (10 baseT or 100 baseTx). The connector nearest the ferrite core should be plugged into the
Vega.
Telephony:
Connect telephones to FXS ports 1 to 8. Note the port numbers increase in an anticlockwise
direction from the bottom left corner. And to ports 9 and 10 on the separate pair of connectors.
FXO 8
IF:13
FXO 7
IF:12
FXO 6
IF:11
FXO 5
IF:10
FXO
9
IF: 56
FXO 10
IF: 57
FXO 1
IF:06
FXO 2
IF:07
FXO 3
IF:08
FXO 4
IF:09
Power:
Insert the power cable into the AC power inlet on the Vega and switch on. The power LED on the
front panel will illuminate.
The LAN LEDs will also illuminate indicating 10 (baseT) or 100 (baseTx) connection, and the FDX LED
will illuminate if Full Duplex mode has been negotiated.
