Vega VEGAKON 66, Operating Instructions Manual

Page: 15 / 20

VEGAKON 66 15
4.3 Functions schedule
The following schedule provides an overview of the switching conditions as they relate to the
set mode and level.
Level Switching condition re- Switching conditioning Control lamp
lay module KON E66 R transistor module VEGAKON
KON E66 T
Mode A Relay energised Transistor conductive does not light
Max. detection
or overfill
protection
Relay deenergised Transistor blocked lights
Mode B Relay energised Transistor conductive does not light
Min. detection
or dry run
protection
Relay deenergised Transistor blocked lights
Power supply failure
Mode Relay energised Transistor blocked does not light
A/B any
Note
If VEGAKON 66 is used for oil warning in water, the oil coating has to be removed from the elec-
trode after responding to oil (= empty signal) as otherwise a correct response to water would
not be ensured.
Setup
6 4 5
6 4 5
6 4 5
6 4 5
6 4 5