background image

2

Contents

VEGAFLEX 81 • Foundation Fieldbus

47589-EN-140324

Contents

1  For your safety

1.1  Authorised personnel ....................................................................................................... 3

1.2  Appropriate use ................................................................................................................ 3

1.3  Warning about incorrect use ............................................................................................. 3

1.4  General safety instructions ............................................................................................... 3

1.5  CE conformity ................................................................................................................... 3

1.6  NAMUR recommendations .............................................................................................. 4

1.7  Environmental instructions ............................................................................................... 4

2  Product description

2.1  Configuration

 .................................................................................................................... 5

3 Mounting

3.1  General instructions for use of the instrument .................................................................. 7

3.2  Mounting instructions ....................................................................................................... 7

4  Connecting to power supply

4.1 Connecting ..................................................................................................................... 10

4.2  Wiring plan, single chamber housing.............................................................................. 11

4.3  Wiring plan, double chamber housing ............................................................................ 12

5  Set up with the display and adjustment module

5.1  Insert display and adjustment module ............................................................................ 13

5.2  Parameter adjustment - Quick setup .............................................................................. 14

6 Supplement

6.1  Technical data ................................................................................................................ 17

Information:

This quick setup guide enables a quick setup of your instrument.

You can find further information in the corresponding, comprehensive 

operating instructions. This manual is available on the supplied DVD 

or in the download area under "

www.vega.com

".

Operating instructions VEGAFLEX 81 - Foundation Fieldbus - 

Rod and cable probe: Document-ID 44218

Editing status of the quick setup guide: 2014-03-17

Summary of Contents for VEGAFLEX 81





















Reviews: