9
4 Connection
VEGACONNECT 4 with connection box • Interface converter USB - HART/I²C
32628-EN-170202
4 Connection
4.1 Connection to the PC
Note:
First of all you should install the driver before connecting
VEGACONNECT 4 to the PC.
An USB interface (1.1/2.0/3.0) is compulsory for connection of
VEGACONNECT 4 to a Windows PC. The connection is provided
with the supplied USB cable. Voltage supply of VEGACONNECT 4 is
provided via the USB interface.
If the supplied USB cable is replaced by another one, make sure that
the insulation thickness of the cable is over 0.65 mm.
To operate VEGACONNECT 4, a suitable Windows driver is required
which is included on the DVD "DTM Collection". As an alternative,
the software is also available free-of-charge from our homepage.
You should always use the latest version to ensure the support of all
instrument functions. The system requirements for operation corre-
spond to those of the "DTM Collection" or of PACTware.
When installing the driver package "VEGA-DTM for Communication",
the suitable instrument driver is installed automatically. When con-
necting VEGACONNECT 4, the driver installation is finished automati
-
cally and is ready for operation without a restart.
2
1
3
OPEN
TWIST
USB
LOCK
Fig. 2: Electrical connection
1 USB connection of the PC
2 USB connection cable (in the scope of delivery)
3 VEGACONNECT 4 with connection box
Connection
Driver
