24
7 Maintenance and fault rectification
VEGACAL 67 • For connection to a controller
31761-EN-200317
7.4 Shortening the electrode
The probe (cable) can be shortened by any length.
1. Loosen the two pins on the gravity weight (hexagon) and remove
the pins.
2. Pull the cable out of the gravity weight.
3. To avoid splicing of the steel cable, tin the cable before shortening
with a soldering iron and tighten the wire.
4. Shorten the cable with a cut-off wheel or metal saw at the lower
end. Make sure the length is correct before shortening.
70 mm (2.76"
)
200 mm
(7.87"
)
Fig. 13: Take the gravity weight into account and shorten the cable respectively
5. Shift the gravity weight again flush to the cable and fix it with the
two pins.
6. Carry out an adjustment. See "
Setup procedure, carry out min.
adjustment - carry out max. adjustment
".
7.5 How to proceed if a repair is necessary
You can find an instrument return form as well as detailed informa
-
tion about the procedure in the download area of our homepage:
www.vega.com.
By doing this you help us carry out the repair quickly and without hav-
ing to call back for needed information.
If a repair is necessary, please proceed as follows:
•
Print and fill out one form per instrument
•
Clean the instrument and pack it damage-proof
•
Attach the completed form and, if need be, also a safety data
sheet outside on the packaging
•
Please contact the agency serving you to get the address for
the return shipment. You can find the agency on our home page
Shortening the electrode
Summary of Contents for VEGACAL 67
Page 3: ...3 Contents VEGACAL 67 For connection to a controller 31761 EN 200317 Editing status 2020 03 03...
Page 33: ...33 Notes VEGACAL 67 For connection to a controller 31761 EN 200317...
Page 34: ...34 Notes VEGACAL 67 For connection to a controller 31761 EN 200317...
Page 35: ...35 Notes VEGACAL 67 For connection to a controller 31761 EN 200317...
