11
5 Set up the sensor with the display and adjustment module
VEGABAR 83 • Modbus and Levelmaster protocol
46318-EN-220624
You can find "
Extended adjustment
" in the next sub-chapter.
Measurement loop name
In the first menu item you assign a suitable measurement loop name.
Permitted are names with max. 19 characters.
Application
In this menu item, you select the application. The selection comprises
process pressure and level measurement.
Information:
With VEGABAR 83 Modbus, the connection of a slave sensor is not
possible. The item "Secondary sensor" must therefore be set to "
Deactivate
".
Units
In this menu item you determine the adjustment and temperature
units of the instrument. Depending on the selected application in the
menu item "
Application
", different adjustment units are available.
Position correction
In this menu item you compensate the influence of the installation
position of the instrument (offset) on the measured value.
Zero adjustment
In this menu item you carry out the zero adjustment for the process
pressure.
Enter the corresponding pressure value for 0 %.
Span adjustment
In this menu item you carry out the span adjustment for the process
pressure
Enter the corresponding pressure value for 100 %.
Position correction
In this menu item you compensate the influence of the installation
position of the instrument (offset) on the measured value.
Max. adjustment
In this menu item you carry out the max. adjustment for level
Enter the percentage value and the corresponding value for the max.
level.
Min. adjustment
In this menu item you carry out the min. adjustment for level
Presettings
Quick setup - Process
pressure measurement
Quick setup - Level meas-
urement