40
6 Set up with the display and adjustment module
SOLITRAC 31 • Profibus PA
43834-EN-211203
Pulse rate of the sensor
Process value
Switching function of the relay
Information:
10 minutes after the key was pressed for the last time, the simulation
is interrupted automatically. You can also interrupt the simulation with
the switch on the electronics module.
6.3.4 Additional adjustments
In this menu item you can set the actual date, time and display format.
When a reset is carried out, all settings (with only a few exceptions)
are reset. The exceptions are: PIN, language and SIL.
The following reset functions are available:
Basic settings:
Resetting of the parameter adjustments to default
values at the time of shipment. Order-specific settings are deleted.
Date/Time
Reset
