12
4 Mounting
Electronics module • SOLITRAC, MINITRAC, POINTRAC, WEIGHTRAC
40104-EN-210107
A
6
Fig. 6: Electronics module in the housing
A Locking of the terminal blocks
6 Terminal blocks
7. Loosen the four holding screws (7) of the electronics module with
a screwdriver (Torx size T 10 )
8. Slowly pull out the old electronics module (2) so that the optical
pad (4) can peel away from the glass window (9).
During this process, the photomultiplier (8) can get stuck inad-
vertently in the housing. In such case, push the photomultiplier
back into the electronics module.
Keep the position of the plug connections inside the electronics
module in mind (take note of the gap in the base and the cor-
responding pins)